| Completed orders |
| Telecommunicator |
|
|
General information |
Software of service spots (SP), providing a high-speed file exchange with remote SP through a network of cellular communication "SkyLink" further – Telecommunicator.
Code - telecommunicator
Work and testings are financed due to the customer
Presentation of works by the removed testing for test terminals emulating service spots with connection to network SkyLink. Installation of the software is spent by the customer, under instructions and consultations of Bogdanovich Software House
Applied software "Telecommunicator " will be used on service spots working on operational system Windows XP and connected to the internet network through provider SkyLink.
Task of the software is synchronization of data through SkyLink network with the remote service spots.
Requirements to functional characteristics:
Telecommunicator should provide an opportunity of reception and transfer of the information in the automated mode. The hybrid operating mode on network SkyLink should be provided. At absence of an opportunity to use Sky Turbo mode, work should be conducted in a standard mode. Constant monitoring signal level of a cellular network should be conducted.
Requirements to procedure of information interchange:
Directions of an information exchange in Telecommunicator are shown on fig. 1.0 
fig 1.0
Telecommunicator should scan constantly folder IN with frequency not less than 3 times a minute. At detection there a file for transfer, it should transfer it in the channel then to destroy. At reception of a file from the channel, Telecommunicator should write down it in folder OUT and forget about it. IP address for transfer, and also ways to folders IN and OUT should be stored in a file tm.ini, being in one folder with the program. Requirements to channel-forming equipment:
As channel-forming equipments should be used modem C-motech CNU-550.
The level of a signal of a cellular network should be defined by means of AT-commands of the modem and be displayed on the screen of Telecommunicator in a digital or graphic kind. Requirements to initial codes and programming languages
software should be developed on Visual C ++. Requirements to the system software used by Telecommunicator:
Telecommunicator should provide stable work in the environment of operational systems Windows XP and Vista.
The structure of the program documentation should include:
Used reports of an exchange with channel-forming equipment, installation manual. |
Column by:
Michael Dorofeeff
Order materials are published without editing, but with saving style and spelling of the Author
Leave your feedback
|
